Mechanical, Electrical & Instrumentation (MEP)
1. Oil & Gas Mechanical Maintenance
Category: Oil & Gas Industry Programmes – Mechanical, Electrical & Instrumentation (MEP)
Course Type: Diploma / Certificate – Skill-Based Programme
Mode: Classroom + Workshop + Practical Training
Duration: 3 – 6 Months
Programme Level: Job-Oriented / Technical & Field Training
The Oil & Gas Mechanical Maintenance programme is designed for students and freshers who want to specialize in mechanical maintenance, equipment handling, and repair in oil & gas operations. This course provides practical knowledge of mechanical systems, preventive maintenance, troubleshooting, and industrial safety, preparing candidates for technical roles in onshore and offshore mechanical operations.
Course Objectives
- Understand mechanical systems used in oil & gas facilities
- Learn equipment maintenance, troubleshooting, and repair techniques
- Develop skills in preventive maintenance planning and execution
- Gain knowledge of safety protocols and compliance standards in mechanical operations
- Prepare for entry-level and technical maintenance roles in oilfields, rigs, and refineries
Key Learning Areas
- Mechanical systems and equipment in oil & gas operations
- Preventive and corrective maintenance techniques
- Troubleshooting mechanical faults and operational issues
- Safety procedures and compliance for mechanical operations
- Coordination with operations and instrumentation teams
- Documentation, reporting, and maintenance record keeping
Topics Covered
- Introduction to oil & gas mechanical systems
- Pumps, compressors, turbines, and rotating machinery maintenance
- Piping systems, valves, and mechanical fittings
- Preventive maintenance schedules and techniques
- Mechanical troubleshooting and repair methods
- Safety protocols and on-site hazard awareness
- Documentation, maintenance logs, and reporting standards
Practical Training
- Hands-on equipment maintenance, assembly, and repair practice
- Mechanical troubleshooting exercises and simulations
- Preventive maintenance planning and execution drills
- Safety drills and compliance awareness exercises
- Mini project: mechanical maintenance report and workflow documentation
Eligibility
- 10th / +2 / ITI / Diploma candidates in Mechanical / Electrical / Industrial backgrounds
- Freshers aiming for mechanical maintenance and technical roles in oil & gas operations
- Interest in equipment maintenance, mechanical troubleshooting, and field work
Career Opportunities
After completing this programme, candidates can work as:
- Mechanical Maintenance Technician
- Oil & Gas Field Technician
- Offshore / Onshore Mechanical Support Staff
- Rotating Equipment Operator
- Industrial Maintenance Assistant
Why Choose This Programme?
- Gain hands-on experience in mechanical maintenance and equipment handling
- Prepares candidates for high-demand technical roles in oil & gas operations
- Exposure to onshore and offshore mechanical systems, troubleshooting, and safety compliance
- Ideal for entry-level and technical careers in industrial maintenance and mechanical support
2. Electrical Systems in Oil & Gas Installations
Category: Oil & Gas Industry Programmes – Mechanical, Electrical & Instrumentation (MEP)
Course Type: Diploma / Certificate – Skill-Based Programme
Mode: Classroom + Workshop + Practical Training
Duration: 3 – 6 Months
Programme Level: Job-Oriented / Technical & Field Training
The Electrical Systems in Oil & Gas Installations programme is designed for students and freshers who want to specialize in electrical systems, maintenance, and troubleshooting within oil & gas facilities. This course provides hands-on knowledge of electrical circuits, motors, control panels, and industrial safety, preparing candidates for technical roles in onshore and offshore electrical operations.
Course Objectives
- Understand electrical systems used in oil & gas plants, rigs, and installations
- Learn installation, maintenance, and troubleshooting of electrical equipment
- Develop skills in preventive maintenance, safety compliance, and fault analysis
- Gain knowledge of industrial electrical safety standards and regulations
- Prepare for entry-level and technical roles in electrical maintenance and support
Key Learning Areas
- Electrical circuits, wiring, and control systems in oil & gas operations
- Motors, generators, transformers, and switchgear handling
- Preventive and corrective electrical maintenance
- Troubleshooting electrical faults and operational issues
- Safety procedures and compliance for electrical operations
- Coordination with mechanical and instrumentation teams
- Documentation, reporting, and maintenance logs
Topics Covered
- Introduction to electrical systems in oil & gas installations
- Power distribution, transformers, and control panels
- AC/DC motors, starters, and industrial drives
- Switchgear, protection devices, and circuit breakers
- Preventive maintenance schedules and techniques
- Fault diagnosis, troubleshooting, and repair methods
- Safety protocols and on-site electrical hazard awareness
- Documentation, maintenance logs, and compliance reporting
Practical Training
- Hands-on installation, maintenance, and troubleshooting of electrical systems
- Electrical fault simulation and repair exercises
- Preventive maintenance drills for electrical equipment
- Safety compliance and emergency response simulations
- Mini project: electrical maintenance and operational report
Eligibility
- 10th / +2 / ITI / Diploma candidates in Electrical / Electronics / Industrial backgrounds
- Freshers aiming for electrical maintenance and technical roles in oil & gas operations
- Interest in electrical systems, troubleshooting, and fieldwork
Career Opportunities
After completing this programme, candidates can work as:
- Electrical Maintenance Technician
- Oil & Gas Electrical Support Staff
- Offshore / Onshore Electrical Technician
- Rotating Electrical Equipment Operator
- Industrial Maintenance Assistant
Why Choose This Programme?
- Gain hands-on experience in electrical systems and maintenance in oil & gas operations
- Prepares candidates for high-demand technical roles in industrial electrical support
- Exposure to onshore and offshore electrical installations, troubleshooting, and safety compliance
- Ideal for entry-level and technical careers in electrical maintenance, industrial operations, and MEP support
3. Instrumentation & Control Systems
Category: Oil & Gas Industry Programmes – Mechanical, Electrical & Instrumentation (MEP)
Course Type: Diploma / Certificate – Skill-Based Programme
Mode: Classroom + Workshop + Practical Training
Duration: 3 – 6 Months
Programme Level: Job-Oriented / Technical & Field Training
The Instrumentation & Control Systems programme is designed for students and freshers who want to specialize in industrial instrumentation, control systems, and automation within oil & gas operations. This course provides hands-on knowledge of sensors, transmitters, controllers, and process control systems, preparing candidates for technical roles in onshore and offshore oil & gas facilities.
Course Objectives
- Understand industrial instrumentation and process control systems used in oil & gas operations
- Learn installation, calibration, and maintenance of instrumentation devices
- Develop skills in control system operations, troubleshooting, and safety compliance
- Gain knowledge of automation systems, PLCs, and SCADA applications
- Prepare for entry-level and technical roles in instrumentation, process control, and MEP support
Key Learning Areas
- Process instrumentation: sensors, transmitters, and gauges
- Control systems: PLC, DCS, and SCADA basics
- Calibration, testing, and maintenance of instrumentation devices
- Troubleshooting and operational safety for instrumentation systems
- Coordination with mechanical and electrical teams
- Documentation, reporting, and compliance for instrumentation operations
Topics Covered
- Introduction to instrumentation and control systems in oil & gas
- Types of sensors, transmitters, and measurement devices
- Process control loops, PLC programming basics, and SCADA monitoring
- Calibration techniques, testing, and preventive maintenance
- Troubleshooting instrumentation faults and operational anomalies
- Industrial safety standards and hazard awareness
- Documentation, reporting, and compliance audits
Practical Training
- Hands-on installation, calibration, and maintenance of instrumentation devices
- PLC and SCADA simulation exercises
- Troubleshooting and fault diagnosis drills
- Safety compliance and hazard prevention exercises
- Mini project: instrumentation maintenance and process control report
Eligibility
- 10th / +2 / ITI / Diploma candidates in Electrical, Mechanical, Instrumentation, or Electronics backgrounds
- Freshers aiming for instrumentation, process control, and technical roles in oil & gas operations
- Candidates with interest in automation, industrial instrumentation, and fieldwork
Career Opportunities
After completing this programme, candidates can work as:
- Instrumentation Technician / Engineer
- Process Control Assistant
- PLC / SCADA Operator
- Offshore / Onshore Instrumentation Support Staff
- Industrial Maintenance & Control Technician
Why Choose This Programme?
- Gain hands-on experience in industrial instrumentation and control systems
- Prepares candidates for high-demand technical roles in process control, automation, and MEP support
- Exposure to onshore and offshore instrumentation operations, troubleshooting, and safety compliance
- Ideal for entry-level and technical careers in industrial automation, instrumentation, and oil & gas field operations
4. PLC & Automation for Oil & Gas Industry
Category: Oil & Gas Industry Programmes – Mechanical, Electrical & Instrumentation (MEP)
Course Type: Diploma / Certificate – Skill-Based Programme
Mode: Classroom + Workshop + Practical Training
Duration: 3 – 6 Months
Programme Level: Job-Oriented / Technical & Automation Training
The PLC & Automation for Oil & Gas Industry programme is designed for students, freshers, and professionals who want to specialize in industrial automation and programmable logic control (PLC) systems used in oil & gas operations. This course provides hands-on knowledge of PLC programming, automation systems, and SCADA integration, preparing candidates for technical and field roles in onshore and offshore oil & gas facilities.
Course Objectives
- Understand PLC systems and automation applications in oil & gas operations
- Learn programming, installation, and troubleshooting of PLC-controlled equipment
- Gain practical skills in SCADA systems, process control, and industrial automation
- Develop knowledge of safety protocols, compliance standards, and operational best practices
- Prepare for entry-level and technical roles in automation and process control
Key Learning Areas
- PLC fundamentals and industrial programming
- Automation systems for process control in oil & gas facilities
- SCADA systems and real-time monitoring
- Installation, calibration, and maintenance of automated equipment
- Troubleshooting, fault detection, and operational safety
- Coordination with mechanical, electrical, and instrumentation teams
- Documentation, reporting, and compliance for automated operations
Topics Covered
- Introduction to PLC and industrial automation in oil & gas
- PLC hardware, inputs/outputs, and programming logic
- Ladder logic, timers, counters, and sequencing in PLCs
- SCADA systems for monitoring and control
- Integration of PLCs with pumps, compressors, and field devices
- Troubleshooting automated processes and fault diagnosis
- Safety compliance and hazard awareness in automation operations
- Documentation and operational reporting
Practical Training
- Hands-on PLC programming and automation exercises
- SCADA simulation and process control monitoring
- Installation, calibration, and maintenance of automated equipment
- Troubleshooting and fault diagnosis drills
- Mini project: PLC-controlled system report and automation workflow
Eligibility
- 10th / +2 / ITI / Diploma candidates in Electrical, Electronics, Instrumentation, or Mechanical backgrounds
- Freshers aiming for automation, process control, and technical roles in oil & gas operations
- Candidates interested in industrial automation, PLC programming, and field operations
Career Opportunities
After completing this programme, candidates can work as:
- PLC / Automation Technician
- SCADA Operator / Engineer
- Instrumentation & Control Assistant
- Offshore / Onshore Automation Support Staff
- Industrial Maintenance & Automation Technician
Why Choose This Programme?
- Gain hands-on training in PLC programming and industrial automation
- Prepares candidates for high-demand technical roles in process control and automation
- Exposure to onshore and offshore operations, troubleshooting, and safety compliance
- Ideal for entry-level and technical careers in oil & gas, instrumentation, and industrial automation
5. Rotating Equipment Maintenance
(Pumps, Compressors & Turbines)
Category: Oil & Gas Industry Programmes – Mechanical, Electrical & Instrumentation (MEP)
Course Type: Diploma / Certificate – Skill-Based Programme
Mode: Classroom + Workshop + Practical Training
Duration: 3 – 6 Months
Programme Level: Job-Oriented / Technical & Field Training
The Rotating Equipment Maintenance programme is designed for students and freshers who want to specialize in maintenance, troubleshooting, and operation of rotating machinery in oil & gas operations. This course provides hands-on training with pumps, compressors, turbines, and related equipment, preparing candidates for technical and field roles in onshore and offshore facilities.
Course Objectives
- Understand types and functions of rotating equipment in oil & gas operations
- Learn preventive maintenance, fault diagnosis, and repair techniques
- Develop skills in installation, calibration, and safe handling of pumps, compressors, and turbines
- Gain knowledge of industrial safety standards and operational best practices
- Prepare for entry-level and technical maintenance roles in oil & gas facilities
Key Learning Areas
- Pumps, compressors, and turbines: types and working principles
- Preventive and corrective maintenance techniques
- Fault diagnosis, troubleshooting, and repair procedures
- Safety protocols and hazard prevention in rotating equipment operations
- Coordination with mechanical, electrical, and instrumentation teams
- Documentation, reporting, and maintenance logs
Topics Covered
- Introduction to rotating equipment in oil & gas installations
- Pumps: centrifugal, positive displacement, and their maintenance
- Compressors: reciprocating, screw, and centrifugal types
- Turbines: steam and gas turbine basics and maintenance
- Rotating equipment alignment, balancing, and vibration analysis
- Fault diagnosis, repair methods, and preventive maintenance
- Safety protocols and compliance standards
- Maintenance documentation and reporting procedures
Practical Training
- Hands-on maintenance, assembly, and repair of pumps, compressors, and turbines
- Alignment and vibration analysis exercises
- Preventive maintenance planning and execution drills
- Troubleshooting and fault diagnosis simulations
- Mini project: rotating equipment maintenance report and workflow documentation
Eligibility
- 10th / +2 / ITI / Diploma candidates in Mechanical / Electrical / Industrial backgrounds
- Freshers aiming for mechanical maintenance and rotating equipment roles in oil & gas operations
- Candidates interested in industrial maintenance, troubleshooting, and field operations
Career Opportunities
After completing this programme, candidates can work as:
- Rotating Equipment Technician
- Mechanical Maintenance Engineer / Assistant
- Pump, Compressor & Turbine Operator
- Offshore / Onshore Mechanical Support Staff
- Industrial Maintenance Technician
Why Choose This Programme?
- Gain hands-on experience with pumps, compressors, and turbines
- Prepares candidates for high-demand technical and maintenance roles in oil & gas operations
- Exposure to onshore and offshore rotating equipment operations, troubleshooting, and safety compliance
- Ideal for entry-level and technical careers in industrial maintenance, MEP, and oil & gas facilities
ICD – Institute of Career Development,
Housing Board Junction,
Thiruvananthapuram,
Kerala, India